Subscriber IP Address 1 |
(Data Wide, General) |
Allows you to define the IP (Internet
Protocol) Address to be assigned to the Subscriber Unit (SU) end of
the serial link1. 
This feature applies in all cases except Conventional
Systems having a selected Data
Profile; when a Conventional System has a Data Profile selected in
the Data Profile Selection field,
the Conventional System then uses the Subscriber IP Address defined in
the Data Profile's Subscriber IP Address
field.
|
For Managed Radios |
The Network ID octets of this IP Address must match the Network ID octets of the Peer IP Address 1 field.
(When octet1 is between 0-127, the IP Address = Class A and the Network ID = the first 1 octet, or When octet1 is between 128-191, the IP Address = Class B and the Network ID = the first 2 octets, or When octet1 is between 192-223, the IP Address = Class C and the Network ID = the first 3 octets) This IP Address: Cannot be completely equal to the Peer IP Address 1 field (see above), and Cannot be equal to the Bluetooth Subscriber IP Address, or the Bluetooth Peer IP Address, and Cannot be equal to the Subscriber Air-Interface IP Address on any Data Profile. |
Octet Values also: Must be between: [0-255], and Cannot all be "0", and Cannot all be 255 |
The Default IP Address = 192.168.128.1 |
this feature is defined in the RMC's 
